Home / Projects
What we can do is shown in projects
Starting point, solution, result — with figures wherever there are any.
Sheet-metal industry · 2026
Measuring station for in-process production control
Manual measuring station for in-field measurements and factory production control (FPC) on large-format sheet-metal parts up to 3000 × 1500 mm. It evaluates distortion, dimensions and sag.
View project
Sheet-metal industry · 2026
Destacker with adaptive vacuum gripper
Concept for destacking perforated sheet-metal blanks up to 3000 × 1500 mm. The sheet is aligned in a reference corner, only one row of suction cups follows the format. The operator no longer has to enter the cell.
View project
Robotics / handling · 2026
Vacuum gripper system VGS1
Vacuum gripper for robots, with spring-loaded suction cups and full IO-Link monitoring.
View project
Robotics / machine tending · 2026
3-point gripper system with compensation unit
Gripper system for round parts with three gripping points and a compensation unit, in two variants for different robots and media routings.
View project
Laboratory / analytics · 2026
Prototype for trace analysis in the lab
Two-part grinding jar made of martensitic chromium steel as a prototype for sample comminution prior to trace analysis.
View projectA similar task?
A photo, rough dimensions and part data are enough to start. We normally reply within 24 hours with an initial assessment.